Repairs To Upvc Windows The Process Isn't As Hard As You Think
Repairs To Upvc Windows The Process Isn't As Hard As You Think
Blog Article
Repairs to uPVC Windows
uPVC is a fantastic choice for modern homes. They are easy to maintain, durable and long-lasting. They do not decay or rust as aluminum and timber.
It is crucial to wash and oil UPVC doors and windows regularly. This will help prevent unnecessary repair costs and also improve energy efficiency.
1. Broken Glass
If the glass in your window is broken it can cause a huge deal of damage to your home, making it extremely dangerous and possibly fatal. It is crucial to take the time to make sure that you are doing everything you can to keep your windows in good repair.
For single pane windows, it is relatively easy to replace windows, and the new one is usually able to fit into the frame of the previous one easily. If you have double-paned windows that are held together by internal beading, it is more difficult to remove and replace the old panes. In this case it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.
If you plan to attempt to remove the glass panes yourself it is crucial to wear the proper safety gear such as gloves that are thick and eye protection. It is also a good idea to lay down a drop cloth before you begin working on the glass so that any shards fall on the fabric instead of onto the floor where they can be trodden under and cause further damage.
Once the glass has been removed from the window, it's best to seal the gap with packaging tape or duct tape to prevent water and drafts from entering the property until a professional is able to come out and fix the window. It also acts as a barrier to prevent any intruders from getting into your home. If the gap is large, you might be interested in the security door with an integrated window as it will provide the best of both worlds.
2. Sagging
Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could develop a number of problems that include sagging. A sagging window can cause problems with light, draughts and even security. It's crucial to act immediately if you notice your uPVC windows are sliding.
Repositioning the hinges can help fix a window that is sagging. You'll first need to open the windows to get at the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and check for fit. If you're satisfied with the fit, tighten the screws to ensure they remain in position.
If you are unable to reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to lose tightness. It is essential to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.
UPVC handles can also loosen up. This is usually due to screws that have been removed over time, but it could be caused by the handle mechanism wearing out. It's relatively simple to fix a loose uPVC hand. First, you'll need close your window and do an initial test fit. The corner joints of the sash should align with the casing joint. If it doesn't, you can use a screwdriver or a wrench to loosen the handle and then turn the mechanism back into its original position.
3. Water Leaks
It is important to act if you wake up every morning to find mouldy walls and floors that are wet. The leaks of water from windows do not only lead to the degrading of the structure of your home but also undermine your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.
This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how serious the issue is, the old caulking may need to be removed. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area more difficult to clean and could reduce the efficiency of your energy.
It is crucial to make sure that the drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more extreme situations, you may have to replace the window.
Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can spread quickly throughout the home.
If the leakage is occurring between the double-glazed glass it is more likely the issue is more with the seal rather than glazing repairs near me the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it opens with the breeze. Anyone with the skills to fix them can replace hinges in just a few minutes.
Like any mechanical component hinges will be damaged over time. It is very easy to replace a hinge on a window but it's much easier if someone helps you to hold the frame.
It is also important to verify that the uPVC hinges are opening and closed in the right direction. You can check this by looking for the arrow on each hinge, this shows which way the window should be opened.
Window hinges that aren't working properly could be caused by improperly opening the window in a certain way or due to improper installation in the factory. This can often be resolved by sending us a photograph through our website and we will be more than happy to give you suggestions.
Regularly lubricating the hinges is essential. Applying a light engineering lubricant on the hinges is an ideal method to accomplish this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.
5. Draughts
Draughts in windows made of upvc can be caused by a few different factors. First, the hinges because of wear and tear, could become misaligned. This will cause gaps to develop where the sash joins the frame. This can be easily fixed by giving them a good clean, but in the event that they are beyond repair it may be necessary to have them realigned or replaced. In addition, the interlock could also become disaligned. This happens on the hinge side and could require to be cleaned. In some cases it is possible to replace them.
The seals may wear out or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and will lessen the possibility of draughts.
The last way to reduce the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler which can be hung over your window sill. They will keep your home warm by blocking out cold air.
With a little regular maintenance and repair windows made of upvc will provide a great level of insulation and security for your home. It is important to remember that all windows eventually become worn out, and it is cheaper to replace them than to repair them. If you are experiencing issues with your Upvc windows, it's best to seek professional assistance as soon as possible.